Electrófilo

En química, un electrófilo (literalmente amante dos electróns) é un reactivo que é atraído polos electróns e acepta electróns. Os electrófilos son especies químicas cargadas positivamente ou neutras que teñen orbitais libres, que son atraídos a un centro rico en electróns. Participan nunha reacción química aceptando un par de electróns para enlazarse a un nucleófilo. Como os electrófilos aceptan electróns, funcionan como ácidos de Lewis. A maioría dos electrófilos están cargados positivamente, ou ben teñen un átomo que leva unha carga parcial positiva, ou presentan un átomo que non ten un octete de electróns. Os electrófilos son atacados pola parte máis poboada de electróns dun nucleófilo.

Os electrófilos que participan frecuentemente en sínteses orgánicas pode ser catións como o H⁺ e NO⁺, moléculas neutras polarizadas como o HCl, haluros de alquilo, haluros de acilo, e compostos carbonilo, ou moléculas neutras polarizables como o Cl₂ e Br₂, ou tamén axentes oxidantes como os perácidos orgánicos, ou especies químicas que non satisfan a regra do octete como os carbenos e radicais, e algúns ácidos de Lewis como o BH₃ e DIBAL.

Química orgánica

Alquenos

A adición electrofílica é unha das tres princiais formas de reacción que afecta a alquenos, que son:

• Hidroxenación por adición de hidróxeno a un dobre enlace
• Reaccións de adición electrofílica con halóxenos e ácido sulfúrico
• Hidratación para formar alcohois.

Adición de halóxenos

These occur between alkenes and electrophiles, often halogens as in halogen addition reactions. Common reactions include use of bromine water to titrate against a sample to deduce the number of double bonds present. For example, ethene + bromine → 1,2-dibromoethane:

C₂H₄ + Br₂ → BrCH₂CH₂Br

This takes the form of 3 main steps shown below;

1. Forming of a π-complex

   The electrophilic Br-Br molecule interacts with electron-rich alkene molecule to form a π-complex 1.

2. Forming of a three-membered bromonium ion

   The alkene is working as an electron donor and bromine as an electrophile. The three-membered bromonium ion 2 consisted with two carbon atoms and a bromine atom forms with a release of Br⁻.

3. Attacking of bromide ion

   The bromonium ion is opened by the attack of Br⁻ from the back side. This yields the vicinal dibromide with an antiperiplanar configuration. When other nucleophiles such as water or alcohol are existing, these may attack 2 to give an alcohol or an ether.

This process is called Ad_E2 mechanism. Iodine (I₂), chlorine (Cl₂), sulfenyl ion (RS⁺), mercury cation (Hg²⁺), and dichlorocarbene (:CCl₂) also react through similar pathways. The direct conversion of 1 to 3 will appear when the Br⁻ is large excess in the reaction medium. A β-bromo carbenium ion intermediate may be predominant instead of 3 if the alkene has a cation-stabilizing substituent like phenyl group. There is an example of the isolation of the bromonium ion 2.

Adición de haluros de hidróxeno

Hydrogen halides such as hydrogen chloride (HCl) adds to alkenes to give alkyl halide in hydrohalogenation. For example, the reaction of HCl with ethylene furnishes chloroethane. The reaction proceeds with a cation intermediate, being different from the above halogen addition. An example is shown below:

1. Proton (H⁺) adds (by working as an electrophile) to one of the carbon atoms on the alkene to form cation 1.
2. Chloride ion (Cl⁻) combines with the cation 1 to form the adducts 2 and 3.

In this manner, the stereoselectivity of the product, that is, from which side Cl⁻ will attack relies on the types of alkenes applied and conditions of the reaction. At least, which of the two carbon atoms will be attacked by H⁺ is usually decided by Markovnikov's rule. Thus, H⁺ attacks the carbon atom that carries fewer substituents so as the more stabilized carbocation (with the more stabilizing substituents) will form.

This process is called A-S_E2 mechanism. Hydrogen fluoride (HF) and hydrogen iodide (HI) react with alkenes in a similar manner, and Markovnikov-type products will be given. Hydrogen bromide (HBr) also takes this pathway, but sometimes a radical process competes and a mixture of isomers may form.

Hidratación

One of the more complex hydration reactions utilises sulfuric acid as a catalyst. This reaction occurs in a similar way to the addition reaction but has an extra step in which the OSO₃H group is replaced by an OH group, forming an alcohol:

C₂H₄ + H₂O → C₂H₅OH

As can be seen, the H₂SO₄ does take part in the overall reaction, however it remains unchanged so is classified as a catalyst.

This is the reaction in more detail:

1. The H–OSO₃H molecule has a δ+ charge on the initial H atom. This is attracted to and reacts with the double bond in the same way as before.
2. The remaining (negatively charged) ⁻OSO₃H ion then attaches to the carbocation, forming ethyl hydrogensulphate (upper way on the above scheme).
3. When water (H₂O) is added and the mixture heated, ethanol (C₂H₅OH) is produced. The "spare" hydrogen atom from the water goes into "replacing" the "lost" hydrogen and, thus, reproduces sulfuric acid. Another pathway in which water molecule combines directly to the intermediate carbocation (lower way) is also possible. This pathway become predominant when aqueous sulfuric acid is used.

Overall, this process adds a molecule of water to a molecule of ethene.

This is an important reaction in industry, as it produces ethanol, whose purposes include fuels and starting material for other chemicals.

Escala de electrofilicidade

Electrophilicity index
Fluorine	3.86
Chlorine	3.67
Bromine	3.40
Iodine	3.09
Hypochlorite	2.52
Sulfur dioxide	2.01
Carbon disulfide	1.64
Benzene	1.45
Sodium	0.88
Some selected values (no dimensions)

Several methods exist to rank electrophiles in order of reactivity and one of them is devised by Robert Parr with the electrophilicity index ω given as:

$\omega ={\frac {\chi ^{2}}{2\eta }}\,$

with $\chi \,$ the electronegativity and $\eta \,$ chemical hardness. This equation is related to classical equation for electrical power:

$P={\frac {V^{2}}{R}}\,$

where $R\,$ is the resistance (Ohm or Ω) and $V\,$ is voltage. In this sense the electrophilicity index is a kind of electrophilic power. Correlations have been found between electrophilicity of various chemical compounds and reaction rates in biochemical systems and such phenomena as allergic contact dermititis.

An electrophilicity index also exists for free radicals. Strongly electrophilic radicals such as the halogens react with electron-rich reaction sites, and strongly nucleophilic radicals such as the 2-hydroxypropyl-2-yl and tert-butyl radical react with a preference for electron-poor reaction sites.

Superelectrófilos

Superelectrophiles are defined as cationic electrophilic reagents with greatly enhanced reactivities in the presence of superacids. These compounds were first described by George A. Olah. Superelectrophiles form as a doubly electron deficient superelectrophile by protosolvation of a cationic electrophile. As observed by Olah, a mixture of acetic acid and boron trifluoride is able to remove a hydride ion from isobutane when combined with hydrofluoric acid via the formation of a superacid from BF₃ and HF. The responsible reactive intermediate is the CH₃CO₂H₃ dication. Likewise, methane can be nitrated to nitromethane with nitronium tetrafluoroborate NO+
2BF−
4 only in presence of a strong acid like fluorosulfuric acid.

In gitionic (gitonic) superelectrophiles, charged centers are separated by no more than one atom, for example, the protonitronium ion O=N⁺=O⁺—H (a protonated nitronium ion). And, in distonic superelectrophiles, they are separated by 2 or more atoms, for example, in the fluorination reagent F-TEDA-BF₄

Véxase tamén

Outros artigos

• Nucleófilo